Kling-freitag K&F CD 44 Digital System controller User Manual download pdf (Page 14)

User's manual K&F CD 44 Digital System Controller

For further information see chapter 'Switchable, Speaker Specific Filters' beginning on

page 21.

12. GAIN Button (Shortcut Button)

Pushing the GAIN button allows you to directly access the input and output gains without

having to navigate through the menu. GAIN

After pushing the GAIN button, the first possible setting is for the signal input (input

gains). If you push it repeatedly, you access the output gains. GAIN

If one of these gain values is not zero, the red LED on the GAIN button lights up. GAIN

For more information, see Capter 'Input and Output Delays' on page 24.

13. REMOTE CONTROL

This RJ45 connector allows for you to connect the CD 44 to a computer or integrate it

into a network in order to execute remote enquiries and remote control or to import

software updates. The connection conforms to Ethernet standards. The IP address can be

changed at <Util » IP Address>.

You can find the latest software versions on www.kling-freitag.de

6.2 Rear

1. Power Supply Connector

IEC power socket 100 - 240 V~ / 50 - 60 Hz, I nominal: 150 - 100 mA.

Connect this socket to a mains outlet using the mains cable supplied with the controller.

To avoid an unintentional loosening of the mains cable, the power supply connector is

provided with a safety clamp. Flip the clamp over the connector of the mains cable after

having plugged it into the power supply connector.

Pay attention to the stated mains voltage. Connection to an incorrect mains voltage may

result in irreparable damage!

2. OUT 1 through OUT 4

3-pin XLR male connector, pin assignment: 1 = ground, 2 = +, 3 = -

These outputs deliver the line signal processed by the controller to the power amplifiers.

Connect these outputs to the inputs of the power amplifiers.

3. Signal input connectors: INPUT 1 through INPUT 4, 3-pin XLR female connectors.

These connectors correspond to the connectors on the front and are wired in parallel

with them. For a detailed description of the inputs see page 9.

Caution

Do not assign the inputs on the front and rear panel simultaneously. This can lead to

malfunction or damage of other appliances!

4. AMP RETURN / SENSE

1 + / 1 - = CH 1 1 + / 1 - = CD 3

2 + / 2 - = CH 2

and

2 + / 2 - = CH 4

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 76 77

No comments

Kling-freitag K&F CD 44 Digital System controller User Manual Page 14