Kling-freitag K&F SEQUENZA 5 W User Manual download pdf (Page 20)

User's manual K&F SEQUENZA 5 incl. accessories

6. Opening the Transport Case

In the SEQUENZA 5 transport case three SEQUENZA 5 W speakers are safely packed. When

dismantling the speakers, you can leave them connected in any given tilt angle. You need

not remove or loosen the rear connectors. This makes them easier to dismount and faster to

disassemble.

To remove the transport lid, turn the

appropriate catches 180° to completely

release the latch.

Once you have released catches, you can

lift off the lid.

To remove the front lid, you must open

two catches.

To remove the main lid, you must also

open the four bottom catches.

You close the case by following these steps in reverse order.

7. Using the Spring Bolt

The spring bolt is the central bolt of the 'Snap&Fly+' rigging system.

It can be set to four positions that you have either set manually or that have come about

because of the handling of the speakers.

Initial position:

The spring bolt is under tension. You can

mount a standard connector.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 87 88

No comments

Kling-freitag K&F SEQUENZA 5 W User Manual Page 20